Reduce and understand your energy consumption with SMART ENERGY
Case studies
11 April 2024
Case studies
04 September 2023
X-FAB : Replacement of two extractor fans
Project duration : 2 days
Technicians : 2
Client expectation
X-FAB (Corbeil-Essonnes) specializes in advanced technologies for the processing of analogue and mixed signals The company produces electronic components varying from 1.0 to 0.13 micrometers using advanced modular processes.
The company has two extractor fans (AV3 / LN355LL 82 – 400 kW) which need to be replaced. One of them is actually broken and the second refurbished. For this purpose, X-FAB has asked us to remove and refit the products.
DV GROUP Solution
The extractors fans allow for operation of a functional circuit in the building’s clean room. They prevent impurities from entering the room, thus allowing it to be sterile.
The fans are positioned on the roof of the building, so a suitable solution must be found for their safe removal. There are two possible options:
- The installation of a giant crane with a 40m jib.
- The use of an AS 350 Squirrel helicopter
We decided to choose the helicopter because the solution is more economical and quicker.
The removal of the extractor fans is done in several stages:
- Motor disconnection (Omec: OMT1 IE2 25 M4 and ALMO (Sermes motorization): SM3 225 MC4 LL NS PTC)
- Dismantling the cable channel
- Disconnecting the extractor ventilator flanges (chimney side)
- Disconnecting the suction flange from the extractor fan
- Replacing the shock absorbers
- Replacement of the 2 extractor fans with a new fan and a refurbished one that the company has in stock
After removal, the extractors fans were taken for subsequent inspection in our workshops.
Clients gains and benefits
- Production downtime was reduced through the use of the helicopter
- Economic gain: 50% savings compared to the installation of the crane
Expertise
We provide you with engineering, maintenance and control solutions based on our knowledge of your processes.
Vibration monitoring of a coffee production line
Case studies
05 April 2024
Obsolescence Management: Audit of a Truck Engine Factory’s Equipment Fleet
Case studies
14 November 2023
Repair and reliability of drives
Case studies
12 September 2023
ELOPAK: Corrective preventive electronic maintenance
Case studies
12 September 2023
Preventive maintenance of Siemens Masterdrives
Case studies
11 September 2023
43 Simovert Masterdrive drives from 0.75 kW to 700 kW
Case studies
11 September 2023
To safeguard the reliability of 32 Siemens (6SE70) Masterdrives on a paper machine section
Case studies
11 September 2023
MELEGHY: Preventive maintenance of 24 Siemens Powerblocks drives
Case studies
11 September 2023
Preventive maintenance contract
Case studies
05 September 2023
Emergency repair on a 120KW ABB ACS800 drive
Case studies
05 September 2023
2 LEROY SOMER 600 kW variators
Case studies
05 September 2023
Overhaul of 12 Siemens Torque Simotics T-1FW3 motors
Case studies
05 September 2023
Preventive maintenance for 17 Siemens servomotors and drives
Case studies
04 September 2023
Troubleshooting of an induced draught fan
Case studies
04 September 2023
19 50 kg (2.2 kW) to 5 ton (7.2MW) motor/reducer/ventilator assemblies
Case studies
01 September 2023
Overhaul of an extruder reducer with 2 indexed output shafts
Case studies
01 September 2023
Maintenance électronique et électromécanique de 3 installations Banbury (moteurs CC et variateurs)
Case studies
01 September 2023
Moteur Siemens 450 KW avec mode de refroidissement à eau
Case studies
01 September 2023
Révision d’un moteur CC 540 KW de laminoir
Case studies
01 September 2023
LENGLET IMPRIMEURS : 1€ to reduce your energy bill
Case studies
01 September 2023
Modelling of the HTA/BT electric network
Case studies
01 September 2023
Fiabilisation d’une ligne de décapage
Case studies
01 September 2023
EMC analysis
Case studies
01 September 2023
Modélisation réseau
Case studies
01 September 2023
Reducer polymerizer vibration monitoring
Case studies
29 August 2023
Maintenance method improvement project
Case studies
29 August 2023
Contrat de mesures vibratoires
Case studies
29 August 2023
Contrat de suivi vibratoire
Case studies
29 August 2023
Contrôle par onde de choc de 46 moteurs asynchrones de 7,5KW (400V) à 750KW (5000V)
Case studies
29 August 2023
Remplacement de 4 CN obsolètes 810T par 1 CN Sinumerik 840D sl Siemens
Case studies
29 August 2023
Modification îlot ZF
Case studies
29 August 2023
Remplacement robot presse
Case studies
29 August 2023
Cellule robotisée de dépose résine et convoyage d’une ligne d’emballage de batteries DAIMLER
Case studies
29 August 2023
Robot de palettisation ligne peinture
Case studies
29 August 2023
Robot de lavage de bacs à endives
Case studies
29 August 2023
Digital Twin d’une nouvelle ligne de production
Case studies
29 August 2023
LENGLET IMPRIMEURS : Retrofit variateurs moteurs unités de récupération de solvant
Case studies
29 August 2023
Rétrofit de l’électronique de puissance et de commande d’une ligne de découpe
Case studies
29 August 2023
Rétrofit électrique pont HFX 16T
Case studies
29 August 2023
Motorisation of compressors in a colliery gas compression station
Case studies
29 August 2023
Obsolescence of the oven’s 7 CC ALSTHOM drives
Case studies
29 August 2023
Retrofitting of an impressive balancing bench
Case studies
29 August 2023
Retrofit of a machine for superfinishing machined parts
Case studies
29 August 2023
Retrofitting of the robotics part of a nine-colour printing line
Case studies
29 August 2023
Modification of the ride “Tonnerre 2 Zeus” [Zeus’ Thunder]
Case studies
23 August 2023